2-1
Chapter 2 Scanner Installation
Precautions
* Keep the scanner out of direct sunlight. Direct exposure to the
sun or excessive heat may damage the unit.
* Do not install the scanner in a humid or dusty place.
* Be sure to use the proper AC power source.
* Install the scanner securely on a level surface. Tilted or uneven
surfaces may cause mechanical or paper feeding problems.
* Retain the scanner box and packing materials for shipping
purpose.
2-1 Unpacking the Scanner
Please unpack the scanner carefully, and check the contents
against the
Checklist.
If any items are missing or damaged,
please contact your dealer immediately.
Installation of the slide guides, paper guide and paper
stand (Fig 2-1)
1. Open the front door by slightly pulling it away from the
unit for few inches.
2. Insert the paper guide onto the center notch located on
top of the unit.
3. Insert the two slide guides to the left and right of the
paper guide. When properly installed, the guides
should move freely from side to side.
4. Insert the two ends of the paper stand into the small
holes on both sides of the paper guide.
5. Close the front door.
