AVIRA NTFS FOR DOS PERSONAL, Руководство пользователя

Страница: 15 / 22

Working with Avira NTFS4DOS
5.2 Command line parameters
You can start Avira NTFS4DOS at any time via the command line.
Avira NTFS4DOS supports the following command line parameters:
Parameter Description
/lX Sets the letter of the first used drive. For example, lC means that the first
partition detected contains the letter C .
/rX Sets the RAM disk size. For example, r4 means that Avira NTFS4DOS was
designed with a 4MB RAM disk.
/? Displays a help screen.
When starting, Avira NTFS4DOS automatically loads a new shell, or a program run as a
shell. If no shell is specified, Avira NTFS4DOS uses the default shell (
command.com ).
After completing work with Avira NTFS4DOS, you can stop the shell and thus also
release the memory used by NTFS4DOS again.
Examples for calling Avira NTFS4DOS
Example 1
NTFS4DOS /lF /r8 command.com /C mybatch.bat
f
This command starts Avira NTFS4DOS to connect the detected NTFS partitions,
starting from the drive letter
F , and creates an 8 MB RAM disk. The RAM disk
contains the first free drive letter for every connected NTFS drive.
f
The file mybatch.bat is executed in a new shell.
f
After executing the file mybatch.bat , Avira NTFS4DOS stops automatically, because
the shell parameter /C was called. Please refer to the DOS operating system
documentation for information on all possible shell parameters.
Example 2
NTFS4DOS F:\AntiVir\avcmd.exe
f
This command starts Avira NTFS4DOS to connect to all NTFS partitions found,
starting with the first available drive letter, without creating a RAM disk.
f
The anti-virus scanner is run in a new shell.
f
When this ends, Avira NTFS4DOS turns off again.
Avira GmbH Avira NTFS4DOS Personal 13