AVIRA ANTIVIR VIRUS SCAN ADAPTER FOR SAP NETWEAVER, Руководство пользователя

Страница: 32 / 79

32 Avira AntiVir Virus Scan Adapter Avira GmbH
Sender Email Address
Type the email address you want to use when sending notifications. This value is used
only if
SmtpMailEnabled
is active.
Example
SmtpSenderAddress=sender@domain.net
Recipient Email Address
Type the email address to which you want to send the notifications. This value is used
only if
SmtpMailEnabled
is active.
Example
SmtpRecipientAddress=recipient@domain.net
5.2 Possible Entry in SAVAPIDL.INI
The .INI file for SAVAPI.DLL is SAVAPIDL.INI . It enables the communication between
AntiVir VSA and the engine. This file is not available by default and the program runs
with default settings.
In order to change the default port for communication with Savapi Service, you have to
create a file named
SAVAPIDL.INI in the directory of SAVAPI.DLL .
It only contains the following entries:
[SAVAPI2DLL]
PortNumber=18370
Port Number
This is the number of the TCP/IP port used for communication between Savapi Service
and
SAVAPI.DLL . If this port is already assigned, you can change it.
Do not forget to change this value in the corresponding entry of the Savapi Service .INI
file (
SAVAPI.INI ) (see Available Entries in SAVAPI.INI – Page 29).
Example
PortNumber=18370
5.3 Immediate Updates
AntiVir VSA is set by default to perform automatic updates every two hours.
Updates can be carried out via the Internet, via Intranet from any computer in your
network or from a shared directory.
Using StartUpdate.exe Savapi Service searches immediately for updates. This does not
depend on the update interval settings. In the event of errors, the application returns the
Errorlevel 1
(very useful for batch files). Successful updates are logged in
SAVAPI.LOG . The application itself has no output.
Background
Immediate updates are useful, for example, to test the settings in SAVAPI.INI .
You can also control updates entirely via the SAP environment (if supported). In this case,
you should set the update interval to 0.