AVIRA ANTIVIR UNIX MAILGATE, Руководство пользователя

Страница: 17 / 114

Milter Mode
Avira GmbH AntiVir MailGate
15
3.3 AntiVir MailGate (Milter Mode) Integration in Sendmail
3.3.1 Requirement
Sendmail version 8.11 or newer with libmilter interface is required.
Otherwise:
X
Read the README file in libmilter directory of the Sendmail kit
( http://www.sendmail.org ).
X
Compile the new version of Sendmail with libmilter interface.
When you want to check, if Sendmail with libmilter interface has been compiled:
sendmail -d0.10 < /dev/null | grep MILTER
3.3.2 Integration
There are two ways of adding AntiVir MailGate (Milter mode) to Sendmail’s
configuration file
sendmail.cf :
z Directly modify sendmail.cf
– OR –
z
generate
sendmail.cf
Directly modify sendmail.cf
X
Insert the following two lines in the configuration file
sendmail.cf
:
Xavmilter, S=inet:3333@localhost, F=R,
T=S:2m;R:2m;E:10m
O InputMailFilters=avmilter
Value meaning z F: determines what should happen if the filter is not available:
– T: emails are temporarily not accepted (error 4XX)
– R: emails are not accepted (error 5XX)
z
T: sets the following timeouts:
– C: timeout to set up the connection to filter
– S: timeout while sending information to filter
– R: timeout while reading an answer from filter
– E: timeout between sending the "End of message" and the response from the
filter