36
4.Network Connection
4.1 Connecting Mode
Direct connection:
Connect the camera and computer by network connecting cable.
Internet connection mode:
Connect the camera to Internet by Router or Switch and user can log in the
device by browser.
Note:
Please do not put the power and network cable in places where can be easily touched to prevent
video quality lowered by unstable signal transmission due to poor contact of cables.
The computer must have the network segment where the camera IP address belong to. The device will
not be accessible if without the segment. I.E. The camera default IP address is 192.168.5.163,then
segment 5 must be added in the computer. Specific steps are as below:
Firstly open the window of Local Area Connection Properties on computer,select the “Internet protocol
version 4(TCP/IPv4)” as shown by picture on the left. Double click or click the property “Internet” protocol
version 4 (TCP/IPv4)to enter into the Internet Protocol Version 4(TCP/IPv4) Properties window,select
“Advanced” to enter into the Advanced TCP/IP Setting and add IP and subnet mask in the IP browser as
picture shown below. Click the “Confirm” to finish the adding of IP segment. User can add the
corresponding network segment according to the revised IP address of the camera.
Содержание AV-1362
