- 61-
Ref#201008109070CSWO
9.) Using CNT with Surf16 CH
CNT makes connecting to the IP Kamera 9070 a very simple task. Using Surf 16 CH and multi device DVR
monitoring software, you can easily view your 9070-CSWO/CSO.
Follow these simple steps:
MAC Address
There are two ways to find the MAC address in IP Edit .
*Note: IP Server must be enabled on your device’s webpage. By default IP Server is enabled.
Find MAC Address in LAN Using IP Edit
1.) In IP Edit , highlight the device that you are using. On the right side of IP Edit you will find the MAC
Address that you will need to use CNT.
*Note: Make sure when you are typing in the MAC address to leave out the “
:
”
Find MAC Address in WAN Using IPService on IP Edit
1.) To find your MAC Address through the internet, Open IP Edit and hit the connect button on IP
Service.
2.)
Then Type in the name of your device in this case it is ―Sample Name‖, then hit the search button.
3.) Your device should be listed and the MAC address should be displayed on the screen. Copy down
the MAC address and use it to connect via CNT.
Add device using CNT
1.) On Surf 16 Ch DVR software, right click on the screen on one of the windows and select Add
Camera
2.) Then under the section labeled
MAC:
Type in the MAC address.
