AvioMac 125cc TWIN, Инструкция по эксплуатации

Страница: 3 / 9

3
WWW.AVIOMAC.COM AVIOMAC 125 TWIN (IDM)
IMPORTANT!
Thank you for purchasing one Aviomac
125cc, one of the best gasoline engine
available. With our 3-year warranty on
manufacturing defects and costumer
support, we are sure that you will be glad
with this engine.
For customer who have had gasoline
engines before some information may not
be new, but we recommend you to follow
our instructions to have a safe and good
running engine for a long time.
Warning: Before starting attempt the
engine read the instruction manual
completely.
•
This is not a toy, it is a high-quality,
powerful engine and it is safe, if it
is used properly.
•
Make sure that when you start the
engine you are not wearing loose
clothing or you are not using things
that could catch the propellers or
the engine.
•
Make sure that all people are
beyond the engine and out of the
propeller line.
•
This engine was designed for
modelling aircraft, so do not use it
for other purpose.
•
Do not start the engine if it is not
kept.
•
It is important to use always
original spare parts and high-
quality accessories.
•
We recommend you to install an
external switch and a servo
operated kill switch (not included).
•
Do not pressurize the fuel tank, the
carburettor has a fuel pump that
take the necessary quantity of fuel
to allow right working.
•
Never start the engine without
wearing leather glove or without an
electric starter.
PACKING LIST:
1 Aviomac engine 125cc Twin
2 Spark plugs
2 Spark plugs covers
1 AT coil
1 Ignition control box
1 Easy Starter
1 Carburettor
1 Instruction manual
2 Aviomac stickers.
INSTALLATION GUIDE
Here you will find some
recommendations. Read them before
install your engine:
1. To reduce possible RF
interference, we recommend to
maintain a 20-30 cm distance
between the engine and the
receiver, servos and the receiver
battery pack.
2. Always use steel screws with self-
looking nuts to ensure the engine
to the firewall.
3. Use a minimum 7mm firewall for
engine installation.
4. Check the tightening of screws
after first flight and periodically
every 5 flight hours.
5. We recommend to use nylon
pushrods, fibreglass or fibre wood
for attach the throttle linkage.
Metal pushrods could cause radio
interference or vibration inside the
engine.