29
Caution! Cleaning and servicing
•
Before carrying out servicing, switch off the power supply and disconnect the
appliance.
•
When cleaning the appliance, do not use metal objects, steam systems,
volatile fluids, organic solvents or abrasive substances.
•
Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
•
To ensure proper electrical connection, follow the recommendations given in
the present manual.
•
Unpack the appliance and visually check that it is not damaged. Do not
connect a damaged appliance. Inform your retailer or point of sale of any
damage. In such a case, keep the packaging.
•
It is recommended that the appliance be allowed to settle for at least 4 hours
before connecting the electrical power supply, so that the compressor fluid feed is
correct.
•
Proper air circulation is necessary to avoid overheating. To ensure sufficient
ventilation, observe the installation recommendations provided.
•
In order to avoid fire risk, wherever possible, ensure that the appliance is not in
contact with walls or with any hot element (compressor, condenser). Observe the
installation recommendations.
•
The appliance should not be placed close to radiators or cooking hot plates or
gas rings
.
•
Check that electrical sockets remain accessible when the appliance is installed.
POWER SAVING
To limit the electricity consumption of your appliance:
• Install it in an appropriate place (see “Installing your appliance”).
• Leave the doors open as little time as possible.
•To ensure that the appliance operates properly, clean the condenser regularly
(see “Routine servicing of your appliance”).
• Regularly inspect the door seals and ensure that they are still closing properly.
If this is not the case, contact your after-sales service.
