Crescent Moon Lamp
Thank you for purchasing our Crescent Moon Lamp. We hope you are happy with your purchase.
Parts Included:
•
Crescent Moon Frame
•
Clear Bauble
•
LED Lights
•
Bauble Top Attachment
Assembly Instructions
:
1.
Attach the Bauble Top to the Crescent Moon Frame by feeding it over the right hook.
2.
Feed the LED light wire through the hole in the Bauble Top Attachment and in to the Bauble.
3.
Once you are satisfied with the layout of the lights in the bauble, secure the Bauble to the Bauble Top
by pushing the Bauble Top wires inside the Bauble until you hear a click.
4.
Finally attach the Bauble top on to the hook so it is secure.
Instructions for use
:
1. Battery compartment is located on the base of the product.
2. Slide switch on the base to the ‘ON’ position to turn the product on.
3. Slide switch on the base to the ‘OFF’ position to turn the product off.
Battery installation
:
1.
Remove exhausted batteries and discard them properly.
2. Clean the battery contacts and also those of the device prior to battery installation.
3. Install 2 x AA batteries (NOT INCLUDED) as shown on the battery diagram in battery compartment.
4. “+” side of battery should face towards you when installing battery.
5. Place battery compartment lid to its original position.
