Avigilon VMA-AIA1-CG1, Руководство пользователя

Страница: 12 / 31

Starting the AI Appliance for the First Time
If you are adding the AI Appliance to an existing site and you use DHCP to automatically assign IP addresses
to all the devices in your security network, you can use the ACC Client software on a workstation with
network connectivity to the AI Appliance to discover it. Use the procedure
Connect to the AI Appliance
(using DHCP) below .
If static IP addresses are assigned to all the devices managed by ACC server software in your security
network, you must use the procedure
Connect to the AI Appliance (using Static IP) on the next page to:
1. Discover the AI Appliance in your local network.
2. Open the Server Management page in a web browser.
3. Manually set the IP address for the AI Appliance.
Connect to the AI Appliance (using DHCP)
If you use DHCP to assign IP addresses in your network, the new AI Appliance is immediately detected after
it is connected to the security network. The ACC server software then adds it to the list of sites that is
displayed in the System Explorer when you start the ACC Client.
1. On a workstation connected to the same network as the AI Appliance, start and log in to the ACC
Client software.
2. Locate the new site in the Site Login list. You are looking for a site labeled “VMA-AIA1-CGx-<serial
number>”.
3. You are prompted to enter new login credentials for the system administrator of the AI Appliance.
Enter
administrator
as the username and a new password.
Important: Save the password in a secure format and location either physically or
electronically so that it can be retrieved if the password is forgotten.
4. In the Explorer right-click on the AI Appliance and select Setup .
5. Click on the server below the site.
6. Click
Server Management .
7. Click Trust .
8. You are prompted to log in to the Server Management.
Enter
administrator
as the username and a new password. Use the credentials you entered for
the system administrator of the AI Appliance.
The Dashboard panel of Server Management for the AI Appliance is displayed.
9. Configure the basic settings for your new AI Appliance in Server Management, including the
hostname, time zone, and language. For more information see Using Server Management on page 16
Starting the AI Appliance for the First Time 8