Avigilon 8.0MP-HD-DOME-360, Руководство по установке

Страница: 19 / 25

11
EnglishEnglish
Advanced Features
Upgrading the Firmware
The firmware can be field-upgraded through the Avigilon Control
Center software. Consult the software user guide for details on how
firmware upgrades are performed.
It is possible for the firmware to become corrupted during an upgrade
— for example, if power is lost during the upgrade process. If this
occurs, the dome camera can be reverted to run from bootstrap
firmware. Once reverted, it can be upgraded as usual.
Figure: The firmware revert microswitch at the rear of the camera.
1. Disconnect power from the camera.
2. Using a straightened paperclip or similar tool, gently press
and hold the firmware revert microswitch.
3. While continuing to hold the microswitch, power the
device. Release the microswitch after three seconds.
Warning — Only revert to bootstrap firmware if the device is
unable to start up due to corrupted firmware.
Caution — Do not apply excessive force. Inserting the tool
too far will damage the device.
Firmware Revert Button