1. Select a camera from the
Port
drop down list.
NOTE:
The PTZ controls are only displayed when the camera is displayed by itself.
2. To move the camera field of view, click one of the directional buttons on the far left.
3. To control the camera’s Zoom, Iris or Focus, click the
+
or
-
buttons.
4. For
Presets
, you can perform any of the following:
l
To add a preset, move the camera’s field of view into position then give the preset a name and
click
Set
.
l
To use a preset, select a name or number from the drop down list and click
Go To
.
5. For
Patterns
, you can perform any of the following:
l
To record a pattern, select a number from the drop down list then click
Record
. Use the directional
buttons to move the camera and create the pattern. When you are done, click
Stop
.
l
To run a pattern, select a number from the drop down list and click
Run
.
6. To activate an auxiliary command, select an Aux# from the drop down list and click
Start
. When you are
finished, click
Stop
.
Using the Encoder PTZ Controls
5
