Avigilon 1.0MP-HD-H264-B1, Руководство по установке, Страница: 11 / 21

5
• External Power — Connect an external 12 VDC or 24 VAC power
source to the power connector block.
For more information, see
Connecting Power in the Cable
Connections section.
5. Check that the Connection Status LED indicates the correct camera state.
For more information, see the LED Indicators section.
Assigning an IP Address
The camera automatically obtains an IP address by default. Once connected to a
network, the camera attempts to locate and obtain an IP address from a DHCP server. If
this fails, the camera uses Zero Configuration Networking (Zeroconf) to choose an IP
address. When the camera's IP address is set using Zeroconf, its IP address is in the
169.254.0.0/16 subnet.
The camera's IP address settings can be changed using one of the following methods:
• (Recommended) Avigilon Camera Installation Tool software application.
• Camera's web browser interface: http:// <camera IP address> /
• ARP/Ping method. For more information, see Setting the IP Address
through the ARP/Ping Method .
• Network Video Management software application (for example, Avigilon
Control Center).
NOTE: Use the default username ( admin) and the default password ( admin ) to
access the camera.
Accessing the Live Video Stream
The camera's live video stream can be viewed using one of the following methods:
• (Recommended) Avigilon Camera Installation Tool software application.
• Camera's web browser interface: http://
<camera IP address>
/.
• Network Video Management software application (for example, Avigilon
Control Center).
NOTE: Use the default username (
admin)
and the default password (
admin
) to
access the camera.