Avigilon 1.0C-H4PTZ-DP45, Руководство по установке

Страница: 10 / 29

l
Always insulate any camera surface that is in contact with another metal or conductive material. It is
recommended that you always isolate the mounting screws from the mounting surface and camera
housing with rubber or plastic shoulder washers.
Installation Steps
Complete the following steps to install the camera:
Removing Protective Material Inside Dome Cover 5
(Optional) Configuring SD Card Storage 6
Installing the Pendant Wall Mount 7
Connecting Cables 10
Securing the PTZ Dome Camera 11
Assigning an IP Address 12
Accessing the Live Video Stream 12
Removing Protective Material Inside Dome Cover
The PTZ dome camera is packaged with protective material inside the dome cover to prevent damage to the
camera and dome bubble during shipping. The protective material must be removed before the PTZ dome
camera is installed.
1. Remove the dome cover by loosening the screws that fix the cover to the base. Use the T20 Torx key
provided in the camera package.
NOTE: Be careful not to scratch or touch the dome bubble. The resulting marks or fingerprints may affect
the overall image quality. Keep the protective covers on the outside of the dome bubble until the
installation is complete.
Installation Steps 5