
1. Make sure the safety lanyard is connected to the camera.
2. Remove the sealing gland caps from the top of the camera.
3. If there are external input or output devices that need to be connected to the camera (for example: door
contacts, relays, analog video, speakers, etc.), connect the devices to the camera I/O connector cable.
4. Connect power using one of the following methods:
l
95 W PoE Injector (POE-INJ2-95W) — Connect an Ethernet network cable to the injector.
l
External Power — Connect a 24 V DC or 24 V AC (RMS) auxiliary power source that supports up to
75 W or 105 VA.
For more information, see
Connecting to Power and External Devices
on page 15.
5. Feed the network cable through the gland cap and cable gland.
Connecting Cables
10