AvidHiFi REFERENCE TWO, Руководство пользователя

Страница: 7 / 12

7
EXTREME CAUTION MUST BE TAKEN WHILST ATTEMPTING THIS PROCEDURE
This process requires at least 3 people.
Before proceeding, ensure that the brakes are applied on all 4 wheels.
If you are unsure how to proceed, please seek advice from your dealer.
1: Undo and remove the two large locking bolts above each of
the casters, at the front of the plinth.
2: With one person standing behind and one standing in front of
the loudspeaker, carefully tip the speaker slightly backward, just
enough for the two casters to drop out of their location.
3: The third person should remove the casters, and place the
spike assemblies in their place being careful to orientate the
foot so that it engages with the irregularly-shaped hole in the
underside of the plinth
4: While holding the spikes in place, slowly lower the speaker
back down, keeping your fingers clear
5: Re-fit and hand tighten the large locking bolts .
6: Repeat steps 1-5 for the rear spikes
FIXING SPIKES (cont’d)
CAUTION
Use the following procedure to exchange the casters for the spike assemblies.