PREFACE
Please take time to read this Instruction Manual before unpacking your Diva II SP Turntable.
This product is a precision-engineered machine and whilst damage is unlikely with careful handling, the
sheer mass of some of the parts could lead to damage of less robust parts within its design.
Some of these parts have been excluded from the warranty.
<TAKE CARE AND READ THIS MANUAL>
INTRODUCTION
Diva II SP is an audio analogue turntable manufactured to extreme limits of precision and design.
There are many unique and novel features in this product and its design allows you to install the pick-
up arm and cartridge of your choice. With correct ancillary equipment will take your listening pleasure
to new levels of excellence.
Whilst it shares some features found in other turntables, it has been designed without compromise not
trying to emulate or improve existing designs but redefine the whole thinking behind turntable design.
We hope that you enjoy this turntable for many years!
WARNINGS
1. To prevent fire or electric shocks do not expose either the power supply or motor assembly to rain
or moisture.
2. The Main Bearing contains a Sapphire Cup Jewel and this can be damaged if proper care is not
taken (see set-up and warranty) and this will affect or stop your turntable working correctly.
3. The Power Supply contains voltages, which can cause serious injury or death as there are no user
serviceable parts and there is no reason to open it. In situations of failure return to an approved
dealer or service agent. There are calibrated components inside and altering their settings will
affect the performance and void the warranty.
4. The Motor is a sealed component and must under no circumstances be opened or adjusted.
PACKAGING
Save all the packing in a dry place away from fire hazard. The Diva II SP Turntable is a precision
instrument and the packaging has been especially designed so that all component parts are safe
during transportation.
You should not have occasion to return your unit to us, but if you need to, the unit must be shipped in
its original packaging to keep it from damage. In the event of the packing being lost or damaged
further packing can be provided at cost.
Do not transport the turntable assembled. This may cause damage and void the warranty.
PARTS CHECKLIST
The packing has been designed to eliminate parts being missed, however if something is found to be
amiss please contact your dealer.
Instruction Manual
1 Bearing
1 Pick Up Arm (if supplied)
1
Platter
1 Motor Assembly
1 Arm Adapter (if supplied)
1
Drive Belt
2 Power Supply
1 Belt fitting pin
1
Clamp
1 Power
Cord
1
Main Chassis
1
4mm Tungsten Carbide Ball
1
