Avid Technology S4 Скачать руководство пользователя страница 16

Страница: 16 / 17

Safety Compliance

This equipment has been tested to comply with safety certifications in accordance
with: UL 60065: 2015, 8th Ed., CAN/CSA C22.2 No. 60065:16, EN
60065:2015-A1/A11:2017, IEC 60065:2014.

Avid Technology Inc., has been authorized to apply the appropriate NRTL mark on
its compliant equipment.

Power Safety Input Rating

Warning

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this equipment near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufac-
turer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other equipment (including amplifiers) that produce heat.

10) Protect power cords from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the equipment.

11) Only use attachments/accessories specified by the manufacturer.

12) For products that are not rack-mountable: Use only with a cart, stand, tripod,
bracket, or table specified by the manufacturer, or sold with the equipment. When
a cart is used, use caution when moving the cart/equipment combination to avoid
injury from tip-over.

13) Unplug this equipment during lightning storms or when unused for long periods
of time.

14) Refer all servicing to qualified service personnel. Servicing is required when
the equipment has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the equipment, the
equipment has been exposed to rain or moisture, does not operate normally, or
has been dropped.

15) For products that are a Mains powered device:

The equipment shall not be exposed to dripping or splashing and no objects filled
with liquids (such as vases) shall be placed on the equipment.

Warning! To reduce the risk of fire or electric shock, do not expose this equipment
to rain or moisture.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polar-
ized plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade or the third prong are pro-
vided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

16) For products containing a lithium battery:

CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type.

17) For products with a power switch:

It should remain accessible after installation.

18) The equipment shall be used at a maximum ambient temperature of 40° C.

19) This unit is provided with a power supply cord set suitable for 120V AC input
only (for U.S.A.and Canada). For other than U.S.A. and Canada, a qualified per-
son must provide for use with this unit, an appropriate, approved power supply
cord set which is in compliance with the end use country requirements and has a
minimum cross-sectional area of 1.0mm2.

20) For products with more than one power cord:

CAUTION: This unit has more than one power supply cord. Disconnect two power
supply cords before servicing to avoid electrical shock.

ATTENTION: Cet appareil comporte plus d’un cordon d’alimentation. Afin de
prévenir les chocs électriques, débrancher les deux cordons d’alimentation avant
de faire le dépannage.

21) For products with an operator-accessible fuse:

CAUTION: For continued protection against risk of fire, replace only with same
type and rating of fuse.

ATTENTION: Pour ne pas compromettre la protection contre les risques d’in-
cendie, remplacer par un fusible de même type et de même caractéristiques nom-
inales.

Avid S4/S6 Power Ratings per Module

Name

Model Number

Power Rating

Automation Module

9100-65496

12Vdc, 1.5A

Channel Strip Module

9100-74073

12Vdc, 6.9A

Display Module

9100-65500