Avid Technology Mojo DNA, Руководство пользователя

Страница: 4 / 28

Using the Avid Mojo DNA
4
Overview
The Avid Mojo DNA is designed to capture and output analog media and
digital media (DV 25) using digital decks and cameras.
The Avid Mojo DNA is powered by an autosensing power adapter that
plugs into a wall plug or power strip.
The Avid Mojo DNA accepts video and audio in different formats and
resolutions, and changes these formats and resolutions to Avid-specific
data for transfer to the Avid editing system over a 1394 cable. The data
transfer uses an Avid-specific protocol that describes the format and
resolution of the data being input.
You then edit the data on the Avid editing system and return it to the Avid
Mojo DNA to be changed back to the proper format and resolution as
needed for video and audio output.
n
To capture and play 1:1 video, you must have an Avid Mojo connected to
your system. Disconnecting the Avid Mojo results in a “Wrong Format”
error message for those 1:1 clips. However, without an Avid Mojo
attached, you can transcode your 1:1 video clips to DV 25 or 15:1s. For
more information, see “Using the Transcode Option” in the Help.
The Avid Mojo DNA consists of:
• The Avid Mojo DNA
• A stand
• A power adapter with power cord
Also included in the kit is a 6-pin to 6-pin 1394 cable that connects the
Avid Mojo to the host system platform and a
Using the Avid Mojo DNA
CD-ROM .
You can also order a special adapter cable that allows you to send a
component signal into or out of the Avid Mojo using both the S-Video and
composite connectors at the rear of the Avid Mojo.