Avid Technology MediaDock 2 Plus Скачать руководство пользователя страница 23

Страница: 23 / 88

Drive-Filler Panel

Drive-filler panels are available if you want to cover a slot that does
not contain an LVD shuttle (see

). A drive-filler panel looks

like an LVD shuttle from the front, but the Avid logo and drive type
locations are blank and there is no LED function. Avid recommends
that you use a drive-filler panel if you frequently run the
MediaDock 2+ with only one LVD shuttle.

Figure 1-5

Drive-Filler Panel

System Requirements

To use a MediaDock 2+ enclosure, you need the following hardware
and software:

•

One of the following hardware platforms and operating software
releases:

A Power Macintosh

system running Mac

OS 8.0 or later.

A PC (personal computer) that runs the Windows NT
operating system (with Service Pack 3 or later).

A PC that runs the Windows 2000 operating system (with
Service Pack 1 or later).

Blank Avid logo

Blank drive type

Содержание MediaDock 2 Plus

























































































Результаты поиска

Содержание MediaDock 2 Plus

Отзывы:

Похожие инструкции для MediaDock 2 Plus

Бренды по названию

Популярные бренды

Avid Technology MediaDock 2 Plus, Руководство по установке и эксплуатации

Результаты поиска

Содержание MediaDock 2 Plus

Отзывы:

Похожие инструкции для MediaDock 2 Plus

Бренды по названию

Популярные бренды