Avid Technology MediaCentral Command, Руководство по установке и настройке, Страница: 169 / 194

Configuring MOS Settings in Command
169
11. Enter the MOS ID. The information you enter here must match the MediaCentral Command
MOS ID in the Command system settings. For more information, see “Configuring MOS
Settings in Command” on page 169 .
12. Click OK. A new row appears in the list.
13. On that row, fill in the fields as shown in the following table:
n
You might need to scroll to the right to view all fields that require modification.
14. Repeat the previous steps to create a second MOS ID for the backup Command Server.
15. Click Save.
16. Restart all ENPS client applications so that the new MOS ID information will appear as an
option.
17. Restart the ENPS News Object Manager (NOM) to allow the new MOS ID to take effect and
appear throughout the ENPS newsroom computer system.
Configuring MOS Settings in Command
The MOS category in the System Settings dialog box allows system administrators to configure the
Command system to integrate with a MOS-enabled newsroom computer system, such as ENPS. A
MOS-enabled newsroom computer system can send playlists to Command.
MOS (Media Object Server) is an industry-standard, XML-based protocol that is primarily used by a
newsroom computer system (NRCS) to maintain running orders on a video server. MOS also enables
servers to update the newsroom computer system with changes to the server’s media inventory.
Command’s MOS support enables communication between the newsroom computer system and
AirSpeed video servers, as shown in the following illustration.
Text Box Name Description
Description Enter the name that identifies this plug-in for users.
IP Enter the IP address of the Command Server running the MOS
Communication service.
Program Select the group you created in step 5.
MOS Version Enter the version used by your MediaCentral Command system.
Although both versions 2.6 and 2.8 are supported, Avid strongly
recommends using MOS 2.8.
Auto Create Ensure the auto create field is enabled.
Object Type Set the object type to VIDEO.