Avid Technology MediaCentral Command, Руководство по установке и настройке

Страница: 13 / 194

Checklist: Command Server Installation
13
Some Avid Interplay products, such as Instinct, Assist, and Access use Service Framework.
MediaCentral Command also uses Service Framework; however, the two versions might not be
compatible. Consult with Avid Customer Support to determine Service Framework compatibility
when Avid Interplay products are installed in the same workgroup. It might be necessary to:
Checklist: Command Server Installation
Determine which computer or computers will serve as MediaCentral Command Servers and, if
installing on a redundant system, decide which one will run the primary services; you should install
on the primary server first, then the backup server(s).
n
If you want to copy the installation CD to a specified location on your network to alleviate or reduce
having to manually insert the CD into actual computers on site, see
“Copying Install CD to Local
Directory” on page 14 .
On the Command Server, complete the following tasks in the order that they are listed. If you are
viewing this checklist online, you can easily link to a topic that provides procedural details for the
task. Return to this main checklist after you have completed each task.
Make sure that your TCP/IP settings have the correct primary and alternate DNS addresses.
Also, ensure the Advanced TCP/IP settings (on the DNS tab) are set to the following:
• The Append these DNS suffixes option is selected and the domain is listed, preferably
first.
• The Register this connection’s addresses in DNS check box is selected.
• (Optional) The Use this connection’s DNS suffix in DNS registration check box is
selected.
If Command will be used to control a third-party video device via VDCP, ensure that a serial card or
serial port server are used.
n
For version compatibility information, see the latest ReadMe available for your version of
MediaCentral Command.
Tasks
Tasks
Use a separate workgroup for the Command system.
Install Command on separate machines that run Service Framework compatible with Command.
Tasks Refer to...
Install Avid Service Framework. “Installing Avid Service Framework” on page 16
Install the License service. “Installing the License Service” on page 21
Configure the License service. “Configuring the License Service” on page 25
Add temporary license. “Adding the Temporary Command License” on
page 25