Avid Technology MediaCentral Command, Руководство по установке и настройке, Страница: 16 / 194

Installing Avid Service Framework
16
n
For upgrades, some files might already exist on your computer. If so, a dialog box (like the one shown
below) will notify you of this and ask for your overwrite approval of existing files with those on the
CD.
5. When the Copy Complete dialog box appears indicating a successful copy, click OK.
Installing Avid Service Framework
Avid Service Framework consists of applications and services which provide dynamic discovery and
lookup mechanisms, a scalable notification system, a centralized configuration tool, diagnostic
logging for workgroup-enabled applications and services, system health monitoring, and so on. Some
of the services are known collectively as Support services. The Support services are viewed,
monitored, and configured using the Service Framework applications.
n
Avid strongly recommends the installation of the Avid Service Framework applications, which take up
almost no space or overhead on the hard drive and can prove vital in troubleshooting integration
issues, etc.
Those most vital to Command are:
Each computer (server and workstation) running MediaCentral Command software requires at least
the core components of Service Framework and must be able to connect to a computer running the
Avid Lookup service.
n
Avid Service Framework and MediaCentral Command must be installed individually on each
computer; do not use drive image software as a substitute for installation. Avid does recommend
making a image of the hard drive after installation, but not before.
Major Services Description Server Workstation
Avid Lookup Service This service enables communication between all
Command and Framework services running in
the workgroup. Without it, there is no
communication between services. Only two
should be installed in a workgroup.
System Configuration This service sets the configuration settings for all
configurable services. The Avid Service
Configuration application is used to enter
configuration information that the System
Configuration service will carry out and set in
the registry. Without it, the workgroup cannot
function. Only two should be installed in a
workgroup.