Avid Technology Artist Control, Руководство пользователя, Страница: 24 / 48

Artist Color User Guide 20
My Surfaces
My Surfaces shows the Artist media controllers connected to your instance of EuControl. There can be one Artist Color, one
Artist Control, one Artist Transport, and up to 4 Artist Mix units in the My Surfaces list, linked into a single large surface.
The top-to-bottom order corresponds to the left-to-right order of the surfaces, respectively. The left-most surface has fader
number 1. Use the up and down buttons (to the right of the
My Surfaces list) to reorder the list.
Each Artist Series controller can be renamed by double-clicking the existing name and typing a new name.
Add
Click Add to add the selected All Surfaces entry to My Surfaces . This connects this Artist Series controller to your instance of Eu-
Control. You can also click and drag an Artist media controller from All Surfaces to My Surfaces .
Add is disabled if all Artist media controllers in All Surfaces are connected to any instance of EuControl.
Remove
Click Remove to remove the selected surface from My Surfaces and make it available to other instances of EuControl.
Remove is disabled if no surface is selected.
Automatically Add
The Automatically Add menu has two settings that control what happens to stored Surfaces between shutdown and startup.
All Surfaces (Default)
This setting is best used when you are the only person running EuControl in your home or studio. It provides an easy plug-and-play
experience by automatically adding your All Surfaces list to your My Surfaces list so you never have to manually edit the My Sur-
faces list.
My Surfaces Only
This setting is useful in facilities where other EuControl users are on your network. When EuControl starts, only the surfaces from
your My Surfaces list are added. Because a surface can only be claimed by one user at a time, this avoids claiming another user’s
surfaces.
Update Firmware
Each time a new version of EuControl is installed, you might need to update firmware on your Artist Series controllers. The firm-
ware is embedded in EuControl software so an Internet connection is not required.
To update firmware:
1
Select each Artist Series controller in the
My Surfaces
list (Shift-click to select multiple devices).
2
Click
Update Firmware
to update their firmware. If a dialog displays a message that the firmware is up to date, no further action
is necessary.
3
Follow the instructions in the EuControl dialog box. While updating firmware, observe the following:
• The Artist Series controllers must be plugged into a working power source.
• Do not power off any units during the update or attempt to interrupt the update.
• The status for each unit being updated is displayed on that device as well as in the EuControl dialog box.
Show Info
Select an Artist media controller and click
Show Info
to display the name, and hardware and software information on-screen.