Known Bugs
17
To delete the clip from FlightPlan:
1. Start FlightPlan application.
2. Connect the AirSpeed in question.
3. Highlight the clip and press the Delete key on your keyboard or select
File > Delete from the menu.
➤
After AirSpeed has captured a clip and it has been checked into
MediaManager, you might receive a message stating “Capture in progress”
when you drag the clip from MediaManager into the Avid editor’s bin.
n
This is more likely to happen on captures over 30 minutes and could occur on
captures completed minutes, hours, or days ago.
Workaround:
Right-click on the clip in bin and select Overwrite
MediaManager Capture Lock. The Avid editor overwrites the metadata on the
MediaManager that was checked in by AirSpeed.
➤
When attempting to create a clip in Absolute mode using the AirSpeed UI or
the Pilot application, and the duration exceeds the available room on the
workspace, the AirSpeed front panel buttons become unresponsive with the
Stop button lit. The Pilot application displays an “Out of disk space” message.
Workaround:
If this error condition occurs, correct the duration or initiate a
new Absolute or Virtual capture using either the AirSpeed UI or the Pilot
application within the available room on the workspace. The front panel
button functionality is restored.
Pilot and FlightPlan
➤
To Delete Protect a clip, right-click on a clip and select Delete Protect from the
pop-up menu. Currently, the Delete Protection shortcut key combination
(CTRL+P) in the Pilot and the FlightPlan applications is inoperable.
To UnDelete Protect a clip, right-click on a clip and select UnDelete Protect
from the pop-up menu. Currently, the Undelete Protection shortcut key
combination (CTRL+U) in the Pilot and the FlightPlan applications is
inoperable.
