A
Specifications
252
LTC Timecode Connector Specifications
The LTC In is an AC coupled differential input feeding a comparator which requires a
minimum 100mV differential between the LTC+ and LTC-. Peak-Peak input levels can be
anywhere between 300 mV and 5.3V.
LTC Loopthrough displays Playback, Channel 2.
The following table lists LTC specifications on the rear panel.
n
Shielded cable must be used on each connection to maintain RFI compliance. Connect the
shield of the cable to the shield of the connector.
USB 2 Connector Specifications
This is a standard USB 2 connector. We support standard USB 2.0 devices, such as flash
drives, keyboards and mice.
LTC Timecode Input/Loopthrough Connector Specifications
Pin #
Signal
Function
1
+ Line
Positive differential signal
2
– Line
Negative differential signal
Содержание AirSpeed series
