Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 305 / 398

Using the AirSpeed Multi Stream Remote Console
305
Recording Clips
There are a few basic methods in which to record or capture clips. This topic contains
information on the methods used to record clips on an AirSpeed Multi Stream server channel
including:
• “Crash Recording Clips” on page 305
• “Cueing Clips for Record” on page 305
• “Recording Clips with Only a Video ID Specified (no Duration or Name)” on page 306
• “Recording Clips with Both a Video ID and Duration Specified” on page 306
• “Recording Clips with Only a Name Specified (no Duration or Video ID)” on page 306
• “Recording Clips with Only a Duration Specified (No Video ID or Name)” on page 307
Crash Recording Clips
This topic contains information on how to Crash Record a clip on an AirSpeed Multi Stream
server channel.
To crash record a clip:
1. Click the Record button.
The clip will record to the location specified on the active AirSpeed Multi Stream server
for that channel.
n
If you do not type a name for the clip, a name will be generated as specified in the Service
Configuration in Interplay.
2. Click the
Stop
button when you want to stop the crash record of this clip.
Cueing Clips for Record
This topic contains information on how to cue a clip for record.
To cue a clip for record:
1. Select the channel you want to record to by clicking on it.
2. Do the following:
a. Click in one of the editable fields (Name, Video ID or Duration).
b. (Optional) Type a clip name, video ID or duration for the clip.
If no video ID, clip name, or duration has been entered for the clip, the clip will be
assigned this information based on how the Default Template for the AirSpeed
Multi Stream server you are recording to was configured.