manualshive.com logo in svg
background image

Chapter 2: Installing a Mix Engine Card

3

Chapter 2: Installing a Mix Engine Card

This chapter provides instructions for installing a DSP Mix En-
gine Card in a VENUE FOH Rack or Mix Rack. 

• For FOH Rack, see “FOH Rack Mix Engine Card Installa-

tion” on page 3. 

• For Mix Rack, see “Mix Rack Mix Engine Card Installa-

tion” on page 5. 

FOH Rack Mix Engine Card 

Installation

Additional Mix Engine cards are installed in the FOH Rack and 
are connected to each other by TDM FlexCables.

Each Mix Engine card has two ports along the top of the card, la-
beled 

Port A

 and 

Port B

. The FlexCable has two connectors, also 

labeled Port A and Port B, to ensure proper connection. Using a 
FlexCable, data communication across multiple cards is achieved 
by connecting Port B of the first card to Port A of the next card, 
from Port B of that card to Port A of the next card, and so forth.

To install the Mix Engine card in the FOH Rack:

1

Shut down the system.

2

Disconnect all audio cables attached to the FOH Rack.

3

Remove the FOH Rack front panel faceplate by unscrewing its 
mounting screws (#1 Phillips). 

4

Remove the Mix Engine card from its packing material. Hold 
the card by its edges.

5

Remove the retaining bracket that secures the right side of the 
cards by loosening the thumbscrews and lifting the bracket. 

6

Locate the open PCI slot closest to the currently installed Mix 
Engine cards.

7

Align the card with the corresponding cutout in the chassis and 

press down on the left side of the card so that it makes contact 
with the PCI slot.

Before handling any card, discharge static electricity from 
your clothes or body by touching a grounded metal surface 
such as the FOH Rack’s rack rails.

Figure 1. Front panel of the FOH Rack

USB

To

 

Control

 

Surface

Power

Reset

FOH

FOH

 

Link

Faceplate

Mounting screws (remove all)

Figure 2. Mix Engine card showing bracket and connectors

Figure 3. Placing the Mix Engine card in a PCI slot (retaining bracket 
not shown)

TDM FlexCable connectors

PCI connector

Mounting bracket

Содержание 9320-62787-00



















Отзывы: