Avid Power ACSW212, Руководство оператора

Страница: 13 / 16

12
the safety guard.
Regularly inspect and tighten all mounting screws and knobs.
Keep saw blade clean and sharp. Sharp blades minimize stalling and kickback.
Keep guards in good working order.
Keep motor air vent clean of dust and debris. Clean periodically.
using it immediately and get it repaired.
Clean tool with a damp cloth and light detergent. Do not use solvents as they can
damage and crack the plastic parts.
Replacing the Carbon Brushes
Unscrew the Carbon Brush Covers.
worn more than half way down, replace them. Sometimes they are just dirty. They can be
cleaned using an ink eraser.
Replace the carbon brushes and covers.
Symptom Possible Cause Remedy
Saw does not start when trigger
is pulled.
1. No power to line cord.
1. Check electrical
outlet for power.
2. Switch Lock Button not
pushed in while pulling
while pulling
trigger.
3. Defective switch. 3. Replace switch.
4. Carbon brushes dirty or
worn down.
4. Clean or
replace carbon
brushes.
While cutting, saw slows down.
Carbon brushes dirty or
worn down.
Clean or replace
carbon brushes.
Saw blade slips while cutting. Hex Screw (42) loose.
Securely tighten
Hex Screw (42)
not open easily.
Debris buildup in the Blade
Cover(11).
Remove Saw
Blade and clean
out Blade Cover
(11).
Wood burns or smokes while
being cut.
Saw Blade dull.
Sharpen or
replace Saw
Blade,
TROUBLESHOOTING
MAINTENANCE