3
IMPORTANT SAFETY INSTRUCTIONS
MAINTAIN TOOLS WITH CARE.
Keep tools clean for better and safer performance.
Follow instructions regarding lubricating, safe performance and changing accessories.
Keep handles dry, clean and free from oil and grease.
REMOVE ALL ADJUSTING KEYS AND WRENCHES.
Make it a habit to check that
keys and adjusting wrenches are removed from any rotating tool before using.
AVOID UNINTENTIONAL STARTING.
Don’t carry tools with your finger pressing on the
switch. Make sure the direction switch is in the
STOP
position when your machine is not
in use or changing attachments.
STAY ALERT.
Don’t operate any tool when you are tired.
CHECK FOR DAMAGED PARTS.
Before using the tool, any part that is
damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Any part that is damaged should be properly repaired or
replaced by an authorized service center unless indicated elsewhere in the instruction
manual. Don’t use the tool if the switch does not turn on and off properly.
REPLACEMENT PARTS.
When servicing, use only identical replacement parts.