Plug and Play
Retrofit Guide
Version 2021Q1.1
© 2021 Avid CNC
All Rights Reserved
M23 Spindle Cable
Connect the male end of your M23 spindle cable to your Spindle / VFD System, aligning the arrow on the cable connector
with the arrow on the panel mount connector.
Power Cable
Plug the power cable from the Spindle / VFD System into an appropriate receptacle, based on your application below.
3 HP and 4 HP Plug and Play Spindle / VFD System
L6-30 receptacle (200-240VAC single-phase)
8.7 HP Plug and Play Spindle / VFD System
L21-30 receptacle (200-240VAC three-phase)
If running on single-phase, refer to
for this system.
