4
The unit requires 3 X 1.5V AA batteries. Open the battery
compartment
cover and insert the batteries with the right polarity
and replace the cover. There should be time display on the
LCD
screen after the batteries are inserted.
I . SETTING DATE & TIME
:
In on-hook state, press
MENU
key, LCD displays
SET DATE
and press
Enter
key, the value for the year flashes.
Press
Up/Down
Key to Edit the year.
Press
Enter
key to confirm and enter the next value month setting.
Repeat the above steps for month setting.
Repeat the above steps for date and time setting.
II. SETTING RINGER MELODIES:
In on-hook state, press
MENU
key
LCD displays
SET DATE
and Press
DOWN
key to scroll to
‘
SET RING
'
III. SETTING RINGER VOLUME:
In On-Hook State, Press
VOL +
or
VOL-
Key to adjust the ringer
volume over 4 levels (0,1,2&3)
During an incoming call, the ringer can be muted temporarily by
using
’MUTE’
key
At the 0 level the
LCD
displays
RINGER
OFF.
HOW TO INSTALL YOUR
PHONE
FU02-090
HOW TO SET YOUR
PHONE
FU02-090
Insert one end of the line cord to the line jack of the base and
the other end to the wall outlet of exchange.
Connect the handset and the unit with the coil cord and line cord.
Lift the handset to confirm that you have dial tone.
Press
ENTER
and scroll to choose between any one of the 8 ring
melodies
By pressing
MUTE
during a call, you will not allow the (called
I
calling person to hear
what you say. You can however hear
called
I
calling party. On pressing
MUTE
again, you can restore
the conversation to normal
MUTE KEY:
KEYPAD LOCK:
REDIAL KEY:
In stand by mode, press
REDIA
L to view the latest dialed number.
Scroll using
UP
or
Down
to review all the dialed number records. Press
speaker or pick up the handset the number will be dialed out automatically.
Under off hook mode, if you press
REDIAL
the phone will dial the last
dialed number.
OTHER IMPORTANT KEYS
In on-hook state, press
MUTE/LOCK
key display shows
‘INPUT PASS’
, now enter the correct password using dial-pad then
press
ENTER
.
If you release the lock, press
MUTE/LOCK
key again display shows
‘INPUT PASS’
, now enter the correct password using dial-pad then
press
ENTER
.
9
Three Emergency/Permanent single touch memory are provided
on your phone and they are designated as E1 to E3
.
A) Store:
At on hook condition press *#01#
Display shows BL ON Press E1,
display shows "_ _", now enter the desired number to be stored
B) Dialing Out from E1 to E3.
Lift the handset or Press
SPEAKER
Press E1 to E3. as desired.
The number stored in this position will be displayed and dialed out.
SINGLE TOUCH MEMORY:
Press Enter key to save
After completing the above steps, press *#01# to lock the memory
