AVGear MHD4K-44 Скачать руководство пользователя страница 32

Страница: 32 / 35

MHD4K-44

8. Firmware Upgrade

Please follow the steps as below to upgrade firmware by the

FIRMWARE

port on the

rear panel:

Prepare the

latest upgrade file and rename it as “08010000.APP” on PC.

Power off the switcher, and connect the

FIRMWARE

port of switcher to the PC

with USB cable.

Power on the switcher, and then the PC will automatically detect a U-disk named

of “BOOTDISK”.

Double-click the U-

disk, a file named of “READY.TXT” would be showed.

Directly copy the

latest upgrade file 08010000.APP (.bin) to the “BOOTDISK” U

disk.

Reopen the U-

disk to check the filename “READY.TXT” whether automatically

becomes “SUCCESS.TXT”, if yes, the firmware was updated successfully,

otherwise, the firmware updating is fail, the name of upgrade file (.bin) should be
confirm again, and then follow the above steps to update again.

Remove the USB cable after firmware upgrade.

After firmware upgrade, the switcher should be restored to factory default by
sending command.

Содержание MHD4K-44




































Результаты поиска

Содержание MHD4K-44

Отзывы:

Похожие инструкции для MHD4K-44

Бренды по названию

Популярные бренды

AVGear MHD4K-44, Руководство пользователя

Результаты поиска

Содержание MHD4K-44

Отзывы:

Похожие инструкции для MHD4K-44

Бренды по названию

Популярные бренды