CS4K-44 V3
7. RS232 Control
Connect the RS232 port to control device (e.g. PC) with RS232 cable. The matrix
can be controlled by sending RS232 commands.
7.1. RS232 Control Software
⚫
Installation:
Copy the control software file to the control PC
.
⚫
Uninstallation:
Delete all the control software files in corresponding file path.
Basic Settings:
Connect the matrix with all input devices and output devices needed, then to connect
it with a PC which is installed with RS232 control software. Double-click the software
icon to run this software.
Here take the software
CommWatch.exe
as example:
The interface of the control software is shown below:
Parameter configuration area.
Monitoring area, show the
commands and its feedback
information.
Command sending area.
Operation area.