AVG-HDWP70TX-IR
4.4. Connection Procedure
Step 1.
Connect HDMI source device (e.g. Blu-ray DVD) to the HDMI input port of
the AVG-HDWP70TX-IR with HDMI cable. Connect a VGA source device
(e.g. PC) to the VGA input port of AVG-HDWP70TX-IR with VGA cable
Step 2.
Connect an AVG-HD402PR to the HDBT port on the rear panel with
twisted pair.
Step 3.
Connect a HDMI display to the HDMI OUT port of AVG-HD402PR
Step 4.
Connect a control terminal to the RS232 port on the front panel of AVG-
HD402PR.
Step 5.
Both AVG-HDWP70TX-IR and AVG-HD402PR have IR IN and OUT.
When one model is used for IR signal receiver, the IR signal must be
sent out by the other model.
For example: When “IR IN” of AVG-HDWP70TX-IR connects with
an IR receiver, the IR transmitter must connect to IR OUT of the
AVG-HD402PR.
The IR signal can be transmitted bi-directionally between the
AVG-HDWP70TX-IR and AVG-HD402PR.
Step 6.
Connect a control device (e.g. PC) to the RS232 port of AVG-HDWP70TX-
IR or AVG-HD402PR (bi-directional RS232 control, either is available)
Step 7.
Connect a DC 24V power adaptor to the power port of the AVG-HD402PR.
The AVG-HDWP70TX-IR is able to get power from the AVG-HD402PR
with the PoC solution.
Note: AVG-HDWP70TX-IR supports unidirectional PoC, i.e, AVG-HDWP70TX-IR
can get power from far-end PoC devices with the PoC function. However, it can’t
power a far-end PoC device when the power supply is connected to HDWP100TX-
IR.
