AVG-HDWP70TX-B
3. Product Appearance
3.1. Front Panel
No.
Name
Description
①
Power
indicator
Illuminates red when power is on
②
SOURCE/
AUTO
Used as video source selection button (with backlight
off):
Press to select one source, press again to select
next source, switching circularly between HDMI and
VGA. The indicator of the selected input source will
illuminate green.
Used as switching mode selection button (with
backlight on):
Press and hold for 3 seconds or more to enter in
Auto-switching mode, the indicator illuminates green
when in auto-switching mode. Press and hold for 3
seconds or more again to enter in Manual-switching
mode.
③
RS232
Serial port, 3-pin pluggable terminal block, connects
with the control terminal to control the Scaler Wall Plate
HDBaseT Transmitter-B, supports bi-directional RS232
control (send control signals from local device or
receive control signals sent from far-end devices).
④
VGA IN
Connect with VGA source device.
The indicator:
illuminates yellow when there is VGA signal input
