AVGear AVG-HD300, Руководство пользователя

Страница: 6 / 13

AVG-HD300
3. Product Appearance
3.1 Appearance of AVG-HD300T
1)
ON: Working status indicator, blink green when the device works fine, turn off
when the device stops working.
2)
LINK: Twisted Pair link status indicator, illuminate green when the connection
is successful.
3)
IN: HDCP compliance indicator, illuminate green when the connected device
supports HDCP and work normally; blink green when the connected device does not
support HDCP.
4)
POWER LED: Illuminate red when power on.
5) HDBT OUT: Connect to the HDBT IN port of AVG-HD300R with a CAT5e
cable.
6)
HDMI IN: Connect to HDMI source.
7) IR IN: Connect with IR receiver, the IR signal received from this port can only
send out via AVG-HD300R.
8)
IR OUT: Connect with IR transmitter, the sent IR signals are received by
AVG-HD300R.
9)
RS232: Serial port, 3-pin captive screw connector, connects with the control
terminal, supports bi-directional RS232 control.
10) DC 24V: Connect with power supply (Not necessary if AVG-HD300R connects
with power).
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.