Avery Weigh-Tronix ZM510, Инструкция пользователя

Страница: 15 / 32

US ZM510 Indicator User Instructions 15
2.2 Powering up a ZM510 indicator
2.2 Powering up a ZM510 indicator
The indicator is always active as long as power is received. Power must be 90-264 VAC
with a frequency of 50 or 60 Hz, or 12-36 VDC. The default power up screen is shown
below:
2.3 Menu access and navigation
The menus used to configure the ZM510 are accessed with passwords. Press and hold
the
SETUP key to access the password entry screen, shown below.
In general, a menu is made up of a group of top level items, sub levels under each of
those and lists of items to view or configure. There are variations on this theme.
Sometimes there may be no sub level or there maybe two sub levels before you get to
a list of items to set.
You will see on-screen lists with instructions on how to choose and set an item in each
menu list. On-screen prompts guide you as you move through the menus.
When icons are on screen the bold box around an icon means it is the highlighted icon.
See the example below.
When a text list appears on screen the highlighted item is shown by a highlight bar over
the text. See the example below.
The main menu is made up of the User, About and Audit menus. See Chapter 4 for
complete information.
CHAN ID
lb
Gross
0
SETPT
Accum Chan: 1 ID: 0
Esc
Clear .
Enter Password
Min Value: 0, Max Value: 999,999
NUM
0
-
User About Audit
Highlighted icon
Esc
scroll up and down list then enter to select
Port 1
Port 2
Port 3
Serial