Avery Weigh-Tronix ZM505, Инструкция пользователя

Страница: 13 / 36

ZM505 Indicator User Instructions 13
2.1 Front panel
2.1 Front panel
The front panel, shown in Figure 2.1 , consists of the keys and displays.
Figure 2.1 Front panel of the ZM505 indicator
The normal function of the keys on the front panel of the ZM505 are listed below.
Never press a key with anything but your finger. Damage to the overlay may result if
sharp or rough objects are used.
Press the TARE key for pushbutton, key entry or preset Tare functions.
Press and hold this key to clear an active tare.
Acts as an up arrow key for menu navigation.
Allows entry of numeric values.
Press the
SELECT key to toggle between the active display values.
Press and hold to enter the setpoint editor.
Acts as a down arrow key for menu navigation.
Allows entry of numeric values.
Press the
PRINT
key to send information to a peripheral device through a
configured communications port.
Acts as a left arrow key for menu navigation and removes last digit during numeric
entry.
Press the
UNITS key to scroll through the available units of measure while in
normal operating mode.
Acts as a right arrow key for menu navigation and inserts new digit during numeric
entry.
Press the ZERO key to zero the display.
Acts as an ENTER key to accept a displayed value or function.
The SAMPLE key can be used to perform custom application functions.
TARE
SELECT
PRINT
UNITS
ZERO
SAMPLE