Avery Weigh-Tronix ZM401, Руководство по обслуживанию

Страница: 33 / 156

ZM400 Series Indicators Service Manual 33
5.1 Diag menu
5 Diagnostics level menus
The DIAGNOSTICS level (password 3570) is the same as the USER level except it
adds the Diag menu. The DIAGNOSTICS level is shown in
Figure 5.1 .
Figure 5.1 DIAGNOSTICS level (password 3570) menus
5.1 Diag menu
Use the Diag menu to check or verify the performance of the indicator. The diagnostic
tests available include: Scale A to D to view output from the connected scale base or
load device, the current zero offset from calibration zero, a display segment test, a front
panel keypad or button test, serial Com ports and USB host port test, remote inputs and
outputs test, and an option card test if installed. You can print an error log report that
provides information on previous error conditions such as overloads or underloads.
The Diag menu is shown in
Figure 5.2 .
Figure 5.2 Diag menu
Each of the items in the Diag menu is explained below:
See page 24 See page 27 See page 31 See page 33
Diag User About Audit
The

and

symbols stand for direction moved in the menu. So Diag

Scale
illustrates that you move down from Diag to Scale . This will help you keep track of
where you are in the menu structure.
Ports Options Outputs
USB
Cur.Zero
Value Clear
1 2 3
Buttons Display Logs
Print Clear
Port1 Port2
Clr no Clr yes
Serial1 Serial2
BSQ
Comprss Tension
Scale 1 Scale 2
Yes
No
Inputs
Bus 1
Card 1
Scale 1 Scale 2
Diag
Scale
Scale 1 Scale 2
Reference Alphanumeric entry procedure
View scale output
in A to D
counts or mV/V
Continuous
display test
(ZERO exits
the test)
Test button
function
(ZERO exits
the test)
Test
configured
inputs
Toggles
selected
output
on and off
Loopback
test
Performs
write/read
test
Loopback
test
Comp. Freq
displayed
Tension freq
displayed
Test
installed
options