Avery Weigh-Tronix ZM205, Инструкция пользователя

Страница: 29 / 34

ZM205 Baggage Scale Indicators User Instructions 29
7.1 Setpoint
7.1 Setpoint
Super  Setpoint
1. With the indicator on, access the Supervisor menu. Refer to Accessing the
menus on page 17 for instructions. From SuPEr , press SELECT …
SEtPnt is displayed. Use this to:
l
set the function of the OVER annunciator
l
enter up to three setpoint (output) values
l
select inputs for up to three inputs
l
print the setpoint settings
l
reset all setpoint settings to factory defaults.
Annunciators
Setpoint  Edit  Annun
2. Press SELECT …
Edit is displayed.
3. Press SELECT …
Annun is displayed.
This stands for annunciator, referring to the OVER annunciator. By
default ( oFF ) this annunciator is ON when the displayed weight is below
the setpoint value or OFF above the setpoint value. If you select on , the
annunciator works in the opposite fashion--OFF when below, ON when
above.
4. Press SELECT …
The current setting is displayed ( oFF or on ).
The  and  symbols used in this section stand for direction moved in the menu. So
Super  Setpoint, shown above, illustrates that you move down from SuPEr to
SEtPnt . This will help you keep track of where you are in the menu structure.
A setpoint value can be entered up to scale capacity.
Turn off or disable any setpoints you are not using. See the Service manual for
information on disabling or turning off setpoints.
The OVER annunciator is tied to both setpoint 1 and setpoint 3. If the weight exceeds
setpoint 1 or 3 the OVER annunciator will light.
If the optional Relay output is installed, it is tied to setpoint 3. The circuit will close
when the weight is under the target weight and will be open above the target weight.