Avery Weigh-Tronix ZK810, Инструкция пользователя

Страница: 17 / 34

ZK810 Counting Scale User Instructions 17
3.2 Counting application
Bulk sampling definition:
When sample parts are being added to the scale they must all be placed on the scale
at once, in other words, in bulk. If the sample is large enough to meet the minimum
weight requirements the piece weight is calculated and the count is displayed with no
extra button presses.
3.2.2 SELECT key default function
In the Count application you can view the gross, net and count by repeatedly pressing
SELECT .
3.2.3 Special key functions
The following keys have an extra function in this application:
SAMPLE Press SAMPLE to perform the sample operation as described below in the
Sampling section.
PRINT Press the PRINT key to perform the print function.
3.2.4 Sample size
By default the sample size choices are 5, 10, 25, 50 or 100. When asked to add
samples, one of these will be the requested count. The smallest allowed sample size
is defined in the password protected Supervisor menu.
3.2.5 Counting in dribble mode
With the count application in dribble mode active, follow these steps to count:
1. Press ZERO to zero the scale, if necessary.
2. Use a tare method to tare a container, if necessary. See Net weighing on page
19 .
3. Press the SAMPLE key…
SAMPLinG is briefly displayed. This means the indicator is zeroing
itself. A message, Add XX , is then displayed. XX is the current sample
size.
4a. Place XX number of items on the scale.
OR
4b. Press the SELECT key repeatedly to scroll through other sample size choices
(5, 10, 25, 50 or 100). When your choice is displayed, place that number of
items on the scale and press
SAMPLE …
buSY is briefly displayed, followed by one of three possible outcomes:
At any time during the sampling process you can abort by pressing the TARE/up
arrow key.