Avery Weigh-Tronix WP-234, Руководство пользователя

Страница: 28 / 35

WP-234 Printer User’s Manual 28
Enlarged Printing
Codes 14 and 15
Reset Sequence
Number
Code 16
Inhibit Line Spac-
ing
Enlarged printing may be selected by sending both
the double height command (code 14) and the
double width command (control 15). The control
codes may be sent in either order, but because of
the double width restrictions, the codes should be
sent at the beginning of a line.
Example of Control Codes 14 and 15:
When the printer receives this control code it will
immediately reset the sequence number to 00000.
A standard character line is made up of ten dot
lines. Eight of these dot lines are used for the
printable character and two are used for space
between lines. When using character graphics it is
desirable to eliminate the two blank lines so the
graphic characters connect together. Sending a
CHR$(17) which is control code 17 anywhere on a
line of data will stop the printer from putting space
between that line and the next. If a CHR$(17) is not
on a print line, the normal space between lines will
be printed.
Example:
Run: