Avery Weigh-Tronix FLI 225, Руководство по обслуживанию

Страница: 31 / 110

FLSC 05 w/FLI 225 Instrument Service Manual 31
8 Supervisor Settings Module
The Supervisor Settings module is available when you access the Supervisor
Management menu or the Admin Management menu, however, this section assumes
the individual is entering password 1793. For more information on how to access the
menus,
see Overview of the Menus and Modules on page 15 .
1. Access the Supervisor Management module as explained in Accessing and
Exiting the Menus on page 16 using password 1793.
2. Press the Enter softkey.
The Supervisor Settings module is displayed as shown in Figure 8.1.
Figure 8.1 Supervisor Settings Module
3. Press the Up or Down Arrow softkey to highlight an option.
4. Press the Enter softkey to select the highlighted option.
5. Configure the option as necessary.
6. After completing configurations, press the Esc softkey to return to the
Supervisor Management menu.
8.1 Zero Band
1. Select Zero Band from the Supervisor Settings module to view or change the
Zero Band value.
The current weight to which the instrument must return to reset all return
to zero (RTZ) functions such as print, tare clear and store transaction is
displayed.
2. Scroll in a value between 0 and the maximum capacity of the scale using the
Data Entry Procedure on page 13 as necessary.
3. Press the Enter softkey to accept the entry and return to the Supervisor
Settings module.