Eyecon 9420 Quick Reference Guide
7
Quick Reference Guide
2.
Once the barcode is recognized, a beep will be heard and the next menu will
appear.
3.
Dispense the desired quantity on the counting platter.
4.
It is quicker to over-pour slightly in one motion, rather than sprinkling pills on
multiple times to achieve the target amount.
5.
Never pour more than can easily fit flat, unstacked, on the tray. If more pills are
required than can fit, press the
Add to Total
button to save the current amount
and then follow the instructions to complete the count.
6.
Rapidly and vigorously, lift the tray slightly and bang it down against the
bumpers, to knock pills off of each other and into a single layer. For flat pills,
you may need to use the spatula to assist with de-stacking. View one of our
videos at
https://www.eyeconvpc.com/Eyecon9420TrainingVideos
for more
assistance.
7.
In
Validation
mode the Quantity window will change color depending on the
target quantity status.
Yellow = under target quantity
red = over target quantity
green = target quantity.
Note: Pills must be distributed in a single layer on the counting platter (not
stacked). A warning message will occur if individual pills cannot be
discriminated..
8.
After ensuring that all excess pills have been removed from the funnel, place
one finger on top of the funnel gate to ensure it has closed completely, then lift
the counting platter to near vertical so that pills flow into funnel. Next place the
vial under the tongue of the funnel gate to lift it up and allow the pills to flow
into the vial. See Dispensing Techniques on page 6.
9.
Continue filling Rx's by scanning the NDC bar code on a stock bottle anytime
in either the Scan Stock Bottle or Counting Pills screen if you need to use an
additional bottle to achieve the desired count..
NOTE: Pressing
Cancel
in the lower left corner of display moves back one screen.
Pour pills on the counting platter efficiently
1.
When pouring pills onto the counting platter, quickly pour from the stock bottle
distributing pills evenly in a single layer while visually estimating your target
quantity.
2.
Speed is critical so slightly over pouring from the stock bottle is more effective
than slowly trying to reach your target by pouring a few pills at a time.
If you do over pour from the stock bottle, simply remove the excess into the funnel by
using the spatula. After achieving the desired quantity, return any excess back to stock
bottle by lifting the funnel gate with the stock bottle positioned under the funnel opening.
Don't manually count off the excess pills. For example, if your target is 60 and you've
poured 87, estimate a scrape off of 20 to 25 pills. If you're still not within 7 pills, scrape
off another group. When you get within 7 pills or less, you can easily scrape off the
number required to reach your desired amount.
