Avery Dennison Monarch 932 Stacker Скачать руководство пользователя страница 23

Each product and program carries a respective written warranty, the only
warranty on which the customer can rely.  Paxar Americas reserves the right to
make changes in the product, the programs, and their availability at any time
and without notice.  Although Paxar Americas has made every effort to provide
complete and accurate information in this manual, Paxar Americas shall not be
liable for any omissions or inaccuracies.  Any update will be incorporated in a
later edition of this manual.

©2004 Paxar Americas, Inc.  All rights reserved.  No part of this publication
may be reproduced, transmitted, stored in a retrieval system, or translated into
any language in any form by any means, without the prior written permission of
Paxar Corporation.

WARNING

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.  This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.  Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.

CANADIAN D.O.C. WARNING

This digital apparatus does not exceed the Class A limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de la classe A prescrites dans le
Réglement sur le brouillage radioélectrique édicte par le ministère des Communications
du Canada.

Trademarks

Paxar is a trademark of Paxar Corporation.
932, 9855, 9860, and Monarch are trademarks of Paxar Americas, Inc. 

Paxar Americas, Inc.
170 Monarch Lane
Miamisburg, OH  45342

Содержание Monarch 932 Stacker

























Отзывы: