11/07 Rev. 4.03-01
USER-/SERVICE MANUAL
Technical Data
AP 7.t
7
Thermotransfer Ribbon
Ribbon Roll
•
Winding Direction
: Colour-side facing inward or outward.
•
Roll dimensions
:
•
Recommended foil types
: Avery Dennison 2670 and 8909.
Connections, Interfaces
Mains Voltage
100-240 V (AC)
Mains Freq.
50-60 Hz
Power
Consumption
•
Max. 250 W
•
In standby mode depending on the equipment 30-40 W
Current Cons.
max. 3.2 A
Interfaces
•
Host interface:
–
RS-232
: Baud: 1200-115200 / 8 bit; suitable connection cord: 1:1 D-Sub 9
extension lead (connector-jack)
–
Centronics
: Bi-directional; conforms with IEEE 1284; nibble mode;
connector at the printer: type C
–
USB
slave V1.1: Transmission rate 12 MBit/s. If the printer is connected to
a host running under Windows, the hosts OS will search for a matching
printer driver.
–
Ethernet
: 10/100 Base T with TCP/IP, LPD, RawIP printing, DHCP,
HTTPD, FTPD, SNMP
•
Standalone mode:
– CompactFlash card
– PS/2 keyboard
•
Peripheral devices. D-Sub 15 jack at the front side of the printer - can be used
for:
– Cutter
– TCS (Textile Cutter-Stacker)
– External Rewinder
•
I/O-board (optional)
– D-Sub 9 jack for RS-232/422/485; Baud: 1200-115200 / 8 bit; galvanic
separated
– D-Sub 15 jack providing I/O signals similar to the USI
External Ø
max. 80 mm
Core Ø
25.4 mm (1”)
Width
25 -105 mm
Length
a
a) The indicated foil length is a typical value; given
this length, most of the common foil rolls stay
below the max. admissible outer diameter.
max. 540 m
[Tab. 7]
Dimensions of the ribbon roll.
