Avery Berkel XM Series, Руководство по установке и программированию

Страница: 34 / 154

2.6 Tax rates 34
XM and XT Setup and Programming Guide
2
2.6 Tax rates
If PLUs are configured with a tax rate, you can print the tax value and
individual tax rates on the receipt. You can program each PLU with one
or two tax references. There are 10 tax references available, and each
one can be assigned a different tax rate.
Use tax reference 0 for products that are non-taxable.
Inclusive tax

The value of the transaction is displayed including the tax.
Exclusive tax

The value of the transaction is displayed excluding the tax. The
tax is added to the receipt subtotal as a separate item when the
receipt is printed.
Important: Tax rates are entered as a percentage. Remember to enter
the digits after the decimal point, for example, enter 10% as 10.00.
Net value tax
In some countries it is a requirement that the sales value net of tax is
printed on the receipts. For these countries, if an inclusive tax system is
used and tax printing has been enabled, the receipt will include:

Tax reference

Tax rate

Net sales

Tax value

Gross sales.
Printing the tax
Your machine has been configured for one of three tax printing options:
Note: See ‘Tax printing
on receipts’ in the
Operator Instructions.
1. Printing the total tax value on receipts
2. Printing the individual tax rate values on the receipt
3. No tax printing.