avertXX HD6012-RW, Руководство пользователя

Страница: 35 / 47

35286AA 35
SNMP Settings
With Simple Network Management Protocol (SNMP) enabled, the camera can be
monitored and managed remotely with a network management system. Contact your
network administrator if you are not familiar with SNMP setup.
UPnP (Universal Plug N’ Play)
•
Enable UPnP – When enabled, the camera will appear in My Network Places on
Windows computers running UPnP on the same network.
•
Enable UPnP Port Forwarding – When enabled, the camera will attempt to
open the web server port on the router automatically.
•
Friendly Name – Set a name to easily identify the camera.
Network Security
HTTP
The camera can send alarm messages to a specific Hypertext Transfer Protocol (HTTP)
site when motion is detected or when the sensor input is activated. You can assign alarm
messages to up to two HTTP sites.
IP Filtering
IP Filtering allows you limit access to your IP cameras by IP address. You can “Allow” or
“Deny” a specific IP address by adding it to the appropriate list. IP addresses on the
“Allowed IP List” will be able to access the IP camera. IP addresses on the “Deny IP List”
will NOT be able to access the IP camera.
IEEE 802.1XSEAP-TLS
This is a well supported security protocol commonly used by wireless vendors. This
security method requires a valid CA certification and key. When properly configured, all
communication between the client (usually a recorder) and the camera is encrypted.