This guide is a quick reference for users to install and operate HD90 Night Vision HD
Indoor/Outdoor Bullet Cameras. It provides only basic information regarding HD90
camera models. For further details on installation and operation, please refer to the
User Manual. The HD90 Camera User Manual can be found on the included CD and
at avertx.com
Before proceeding, please check to confirm that the box contains the items listed
here. If any item is missing or has defects, DO NOT install or operate the product and
contact AvertX for assistance.
About this Guide
CONTENTS
HD90 Bullet Camera
Hex Head Wrench
Quick Start Guide & Installation CD
HD90 QUICK START GUIDE
Screws
Anchors
All HD90 cameras can be installed directly
onto a wall or ceiling. Be sure that the
structure is strong enough to support the
camera.
1. If passing the cord through a wall or
ceiling, drill a 3/4” hole.
2. Connect the Ethernet cable to the dongle
on the camera.
•
Protect the network cable connection
from water damage by running the
cord inside a wall or ceiling, or through
conduit.
•
For outdoor installations, seal any
holes in the wall or ceiling with silicone
caulk to protect against water intrusion.
3.
Affix the mounting bracket to the ceiling
or wall with the included self-tapping
screws and wall anchors.
4. Use the included hex-head wrench to
loosen the bolt on the side of the bracket
mount and on the camera housing.
5. Adjust the position of your camera.
6. Tighten the bolts to secure your camera.
INSTALLATION
Remove Packaging
Align Holes on Wall
Adjust Aim
31629AC
